x

Zintek® ONE

One layer – Best protection

Corrosion protection

Up to 480h without corrosion in NSST according to ISO 9227

One coat

One layer system

Uniform
surface

Uniform surface even after mechanical stress

Zinc flake coater
  • Inorganic silver zinc flake base coat
  • One layer system
  • Reliable corrosion protection of 480 h NSST with only one coat (6 – 8 µm)
  • Very good adhesion and wear resistance
  • Highly cost effective process

Automotive_lowOil and gas_low

Constructions_lowWind energy_low1

  • Applied in dip-spin application with a typical thickness of 6 ‒ 8 μm with only one coating step
  • Particularly suitable for parts such as bolts, screws, springs and others, with a simple geometry especially for construction and heavy industry applications

Zintek® ONE

One layer – Best protection

 

With Zintek® ONE, Atotech introduces a new silver inorganic zinc flake base coat providing reliable corrosion protection with only one coating layer. This makes Zintek® ONE a cost-effective alternative to standard zinc flake applications and conventional acid zinc based corrosion protection finishes. For highly cost-driven applications such as fastener coatings, the demand for economical but reliable corrosion protection systems is constantly increasing.

In particular, customers in the low-end market whose performance requirements below 480h in Natural Salt Spray Test (NSST) have been calling for simplified production processes that help to reduce process costs, handling costs and energy consumption.

Zintek® ONE achieves up to 480h without corrosion in NSST according to ISO 9227 (depending on the part geometry and equipment used). The new base coat is applied in dipspin application with a typical thickness of 6 ‒ 8 μm using only one coating step. Excellent mechanical resistance properties and very good adhesion ensure a uniform surface even after mechanical stress.

Accordingly, Zintek® ONE is particularly well-suited for parts including bolts, screws, springs, etc. with simple geometry. It is also especially useful for construction and heavy industry applications.

What inspires us

Why we developed Zintek® ONE

Your challenge

For highly cost-driven applications such as fastener coatings, the demand for economical coating systems is constantly increasing. Fastener manufacturers and applicators, for example, are searching for a cost efficient and reliable alternative to hot-dip galvanizing in order to avoid typical issues like recess or threat fillings. However, the industry cannot compromise on corrosion protection properties.

Our solution

Presenting Zintek® ONE, our zinc flake base coat designed to provide reliable corrosion protection with only one coating layer. This makes it a cost-effective alternative that helps to reduce process costs, handling costs and energy consumption. Due to more simplified handling, it is an ideal alternative to hot-dip galvanizing on fasteners .

Zintek® ONE

pdf / 217 KB

Contact us

Country

Name

Email

By entering your email address you agree that we will answer your request via email.

Your message