Fumetrol® 21 LF 2
Latest non-PFOS mist supressant
Reduction of mist
Dramatic reduction of Cr(VI) mist in the work area reducing emissions, exposure and contamination
EPA, CEPA, REACH, Stockholm Convention on POP compliant, SCAQMD approved
Superior low-foaming action
- Non-PFOS formulation
- Excellent low foaming action
- Dramatic reduction of Cr(VI) mist in the work area
- Less drag-out and solution loss due to mist emissions
- 1 product for make-up and replenishment
- For functional and decorative chrome plating
- Easy monitoring and control through surface tension measurement
- Surface tension measurement possible with ring tensiometers, bubble tensiometers and stalagmometers
Fumetrol® 21 LF 2
Non-PFOS, Non-PFC, mist suppressant
Fumetrol® 21 LF 2 is our proven, robust and effective permanent type, low foaming non-PFOS mist suppressant for chrome plating applications. Its ease of operation, high stability and simple conversion of old suppressant systems makes it the ideal choice for reducing mist and complying with the latest PFOS directives.
The mist formed during functional or decorative chrome plating is very fine and voluminous and as it contains toxic Cr6+ can create a health hazard for people as well as contaminating equipment in the vicinity of the plating tank.
After several years of development Atotech was the first to release a low foaming, non-PFOS mist suppressant for the chrome plating market.This was Fumetrol® 21 LF which fully complies with non-PFOS legislation and directives. Fumetrol® 21 LF 2 has a wider working window, is only a single product and has superior low-foaming action.
What inspires us
Why we developed Fumetrol® 21 LF 2
During functional and decorative chrome plating a considerable amount of gas bubbles are generated at the anodes and cathodes which then burst on the surface of the solution creating a Cr6+ containing mist. The mist formed can create a health hazard for people as well as contaminating equipment in the vicinity of the plating tank.
Studies have shown that by reducing the surface tension of a chrome plating solution to below 40 mN/m emissions of Cr6+ due to mist can be significantly reduced.
Our Fumetrol® 21 LF 2 dramatically lowers the surface tension reducing mist. Combined with a thin foam layer that forms around the cathodes and anodes that act as a physical barrier to further reduce mist and so Cr6+ emissions.
How mist suppressants work
The different ways that wetting agent based mist suppressants reduce Cr6+ aerosols
Reduction of bubble size and energy by surface tension reduction
Reduction of droplet emission size and energy by surface tension reduction
Physical barrier to droplet emission by foam blanket formation