Master Remover® 7000

 

Rapid and sustainable paint removal technology

 

designed for powder coating

Process variability

 

Suitable for off-line or in-line as well as, spray or immersion application

Preserves intended substrate

No etching of the substrate and free of extreme temperatures, eliminating undue stress on parts. Compatible with delicate parts, geometry and aluminum

Environmentally sound

Free of chlorinated solvents, NMP and sulfuric acid. With long life to no dump capability. Low energy, low consumption & low waste generation

Paint remover master
  • Rapid removal of powder paint and some e-coat and wet paint
  • Ideal in-house process for hook, rack and fixture cleaning; also suitable for part reclamation
  • Highest level of process versatility, allowing for use in both spray and immersion applications as well as in-line or off-line
  • Unique filterability supports long solution life and reduced waste generation
  • Simplified operation with single product make-up and replenishment
  • Preserves intended substrate
  • Eliminates post-process cleaning requirements
  • Free of chlorinated, NMP solvents and sulfuric acid
  • Low energy demand
  • Low maintenance
  • Provides consistently clean components, supporting reduced paint consumption

Automotive_low
  • In-line and off-line stripping
  • Architectural Al and furniture applicators
  • Various hooks, racks, fixtures and parts
  • Delicate tools and parts with complex geometry (springs)

Master Remover® 7000

Sustainable paint removal technology

Master Remover® 7000 is a versatile, single-phase, non-aqueous paint removal process capable of penetrating and rapidly removing powder paint from steel, cast iron, aluminum and light metal substrates.

Applied in-line or off-line by spray or immersion, Master Remover® 7000 disrupts the adhesive bond between metallic substrates and paint coatings, leaving a clean, ready-to-use component that can be re-painted and/or re-worked.

Master Remover® 7000 is easy to control and the most cost-effective process to operate. It exhibits very fast stripping rates (just minutes) and extended life under high loading conditions in closed loop environments. Its stripping performance is superior to all conventional paint removal processes available to the market today.

What inspires us

Why we developed Master Remover® 7000

Your challenge

Fixtures (racks, hooks and jigs) used in powder coaters plants’ paint lines accumulate paint and require frequent paint removal. Paint removal is typically conducted by mechanical, thermal and hazardous chemical processes. Each of these have drawbacks including part etching and incomplete paint removal, and are often conducted externally due to their hazardous nature.

Our solution

Our Master Remover® 7000 is a unique and truly sustainable paint removal process that offers many economic, process and environmental advantages. It very efficiently removes powder coatings from a wide range of metal substrates. Our process provides manufacturers an in-house solution with off-line or in-line possibilities, capable of meeting performance requirements and environmental regulations.

Master Remover® product line

Sustainable paint removal technology

Our Master Remover® sustainable paint removal processes offer many economic, process and environmental advantages over conventional paint stripping methods. Master Remover® processes efficiently remove e-coats, wet paints and powder coatings from a wide range of metal substrates.

Master Remover® 7000
pdf / 169 KB

Contact us




    By entering your email address, you agree that we will answer your request via email.

    Output